MONOGRADE OIL
Monograde oils are recommended for gasoline and diesel engines, they are formulated for exceptional performance and stability.
SYNTHETIC OIL
100% full synthetic lubricant with high performance, high protection while providing fuel economy. Approved by TOYOTA, MAZDA, HYUNDAI, KIA, GM-OPEL, CHEVROLET, FORD, SUZUKI, NISSAN, INFINITI, LEXUS and HONDA, Specially designed for the latest generation vehicles, equipped with gasoline, naturally aspirated, turbocharged, indirect or direct injection engines , which meet the anti-pollution standards that require a reduced content of Sulphated Ash, Phosphorus and Sulphur.
MOTOR OIL
Improved semi-synthetic multigrade lubricating oil for gasoline or diesel engines, meets the requirements of the main engine manufacturers and, in addition to having the right viscosity to work at high temperatures, is characterized by its good detergent and dispersing properties. designed to achieve lower CO2 emissions and improve fuel economy. Fully compatible with previous engines and oil categories.
GEAR OIL
Premium gear lubricant designed for gears operating under severe temperature and load conditions. Formulated to reduce wear and promote long life for gears, bearings and seals.
TRANSMISSION OIL
Transmission Fluid is a passenger car and light truck transmission fluid for most pre-2006 automatic transmissions manufactured by General Motors, Ford Motor Company and other makes that require a high performance, multi-purpose transmission fluid. Tractor Fluid is a universal tractor hydraulic fluid intended for use in transmissions, final drives, wet brakes, and the hydraulic systems of tractors and other equipment that employ a common fluid reservoir. It is formulated with premium, severely hydroprocessed base stocks and additives that help provide thermal and oxidation stability, friction control, load-carrying ability and protection.
HIDRÁULIC OIL
Hydraulic Oils AW are formulated with paraffinic base oils. They provide excellent antiwear protection, rust and corrosion inhibition, as well as foam suppression and aeration. All grades have excellent demulsibility characteristics.
Hydraulic systems, due to the nature of their operation, experience accelerated wear unless they are protected by clean, high quality anti-wear oils. Surge pressures in pumps and valves can increase metal-to-metal contact unless anti-wear protection is present. The anti-wear additives in AW Hydraulic Oils create a protective film on metal surfaces. This protective film minimizes metal-to-metal contact, which is more severe in vane- and gear-type pumps. As hydraulic pressures increase above 1000 psi, the need for wear protection increases proportionally.
POWERSHIFT OIL
Powershift Transmission Fluid is a high-performance multi-functional fluid developed for use in transmissions, final drives and hydraulic systems of off-highway equipment where a fluid meeting Caterpillar TO-4 performance requirements is specified. It provides substantially improved friction and antiwear performance compared with older API CD/TO-2 quality fluids, resulting in longer equipment life and reduced risk of field failure. The SAE 10W and 30 viscosity grades also are recommended for use in Allison off-highway heavy-duty automatic transmissions where a C-4 quality fluid is specified. Powershift Transmission Fluid is formulated with additive technology that provides improved deposit control, corrosion protection and load-carrying capacity for better equipment protection and more reliable operation. Its carefully optimized frictional properties prevent clutch slippage for smoother, more consistent transmission operation and also provide improved wet brake performance.
HEAT TRANSFER OIL
Heat Transfer Oils are high-quality straight or inhibited oils developed for use in open and/or closed liquid-phase heat transfer systems. They have excellent thermal stability and provide excellent resistance to cracking and sludge formation for long service life. They are not recommended for use in vapor-phase heat transfer systems. Heat Transfer Oil 32/46 is a straight oil recommended for use in closed systems operating under relatively mild conditions. Heat Transfer Oils 22, 32 and 46 are paraffinic oils fortified with select additives that provide enhanced oxidation resistance for long service life, and detergency to help keep the system providing maximum heat transfer efficiency. They are recommended for use in both open and closed systems operating under more severe conditions.
CUTTING OIL
Soluble cutting oil is used broadly in machine shops as a multifunctional cutting fluid. It is primarily formulated to cool and lubricate the contact point of the tool and the work piece.
TURBINE OIL
R&O oils are turbine oils designed to give outstanding performance in steam and hydroelectric turbines.
DIELECTRIC OIL
They offer maximum performance, reliability and safety that position them as the most used in many current applications for electrical transformers, inhibited and non-inhibited, they have high stability against oxidation, good dielectric strength and very good low temperature properties.
COMPRESSOR OIL
Compressor oils are recommended for air compressors; especially portable and stationary rotary, vane, and screw compressors.
INDUSTRIAL GEAR OIL
Industrial Gear lubricants are premium quality extreme pressure gear oils with excellent load carrying capacity, water demulsibility, oxidation stability, and corrosion protection.
GREASE
Grease versatile high pressure with good adhesive properties. They protect against wear and corrosion in a wide variety of automotive and industrial applications, even in wet, muddy or dusty conditions.
ANTIFREEZE AND COOLANT
Antifreeze/Coolant – Premixed 50/50 is a single-phase, low-silicate, ethylene glycol-based coolant/antifreeze designed for use in gasoline engines, heavy-duty, natural gas engines and on-highway and off-highway diesel engines.
